Badger garbage disposal hookup

badger garbage disposal hookup

How to install a Badger 5 garbage disposal?

Now it’s time to install garbage disposal under your kitchen sink. Align the drain on the Badger 5 Garbage Disposal with drain assembly. Turn the little mounting tabs on clockwise until your new garbage disposal clicks into place on the mounting ring. Our garbage disposal came with a cord ready to plug in.

Why is my Badger 1 garbage disposal so loud?

It Is Generating a Very Loud Noise. If your Badger 1 garbage disposal is producing a loud noise, then you should check its shredding plate. See if it wiggles or wobbles up and down or if its blades are stuck, which entails replacement of the unit.

How do you hook up a garbage disposal to a plug?

Tighten the ground screw with a screwdriver to secure the wire. Connect the white (neutral) cord wire to the white (neutral) wire on the disposal, using a wire connector. Connect the black (hot) cord wire to the black (hot) wire of the disposal with a wire connector.

What color is the hot wire on a garbage disposal?

With some disposals, the hot wire lead may be red rather than black. If so, connect this red wire lead to the black wire in the appliance cord. Some cords also arent colored, in which case, the lead with ridges on the outer edge is the neutral or white wire, the center wire is the ground wire, and the wire with no ridges is the hot wire.

Which wire is the hot wire on a garbage disposal?

The smooth wire is for the hot or connects to the Black wire of the disposal. The wire with lines is used for the neutral and connects to the White wire of the disposal. The center wire is typically the ground and in most cases the ground wire, and with some cords the ground wire has green insulation.

How to wire a garbage disposal to a wall?

Also, connect the other black wire to the black and yellow wire from the garbage disposal. You can see a green screw in the wiring compartment; connect the ground wire to this screw. Secure the connections using the two-wire nuts provided.

How do you hook up a garbage disposal to a plug?

Tighten the ground screw with a screwdriver to secure the wire. Connect the white (neutral) cord wire to the white (neutral) wire on the disposal, using a wire connector. Connect the black (hot) cord wire to the black (hot) wire of the disposal with a wire connector.

Where is the switch on a hardwired garbage disposal?

When hard-wired, the disposal is connected to a switch that is installed in an electrical box either in the sink base cabinet or on a wall near the sink. If the switch is near the sink, theres usually a second box, serving as a junction box, inside the cabinet.

Related posts: